Search This Blog

Pages

Wednesday, November 4, 2026

BUMBLE BEE COSTUME

 And so it begins.....another generation where I get to create Halloween costumes.  Woo Hoo!!  My daughter and her husband wanted our new Granddaughter to be a bumblebee for her first Halloween.  So, of course I began the process back in August to give myself plenty of time to get it right.

I settled on yellow and black broadcloth for the body.  I found a black long sleeve onesie and Mom found some black tights.  So we now had the basics......The wings threw me for a bit.  But I landed on (no pun intended) a combination of clear vinyl tablecloth and iridescent chiffon as my base.  The framework/veins within the wings I chose black pipe cleaners. 
I felt the wings were going to be the most challenging, so that's where I began my project.  I sewed some parts, but most of it was put together with a glue gun.   I worked hard on the shape and size.
 
                                               
The antenna I also made from pipe cleaners with pom poms at the very top.  I reinforced some stretch lace that I used for the headband to keep them from pulling at the lace.  All in all, I was pleased with the final result.  This is the first costume I made for a little one so small (she's just 9 months old).  The first costume I made for my daughter was a clown costume that she wore at 15 months old. 

                                                  
Until next year...............................







Wednesday, October 7, 2026

CHILD'S BUSY BOOK

 With a new Grandbaby in our family, my creative juices and hands have been busy!  I recently created a "busy book" for her.  In all my research, I decided I liked the concept of a "binder" type book which allowed pages to be added and removed.   

                                       

I used metal binder rings which make it super easy to remove and replace pages with age appropriate activities that will entertain and challenge her as she grows.

       

When I first gifted the book to her, it began with a total of six pages (or three since I sewed them back to back).  They were mostly sensory type pages.  Since then, I've made more pages which match her dexterity level.    For the other seamstresses that may be reading this, the button page was from that mason jar of "spare" buttons we've collected, or maybe in my case....the jar I inherited and added my own to over the years.  I also had the rik rak, trim, fluffy flowers, zippers, shoelaces.  It's amazing what you can find in those craft bins!

I have several more pages that I've started which she should be ready for in the next several months.  I found the felt on Amazon, using a standard weight for the pages themselves and a heavier one for the "binding" that holds the eyelets.  I'll also use the heavier version on the pages I'm working on which are a bit more intricate and I'll be using my Silhouette Cameo machine to help with the cutting.  A good example is the "clock" page.....the numbers for the clock face are just too intricate to cut by hand.  And so far, my practice run went well with my machine.   

 I'm pleased to report that she has definitely spent time with the book...it's a great option when she still wants to explore/play, but you need to manage the amount of activity.  For instance, before nap time.  It certainly can travel well.  Making it a good option for a long car ride as she gets older, or even a plane ride (I'll plan to add some new pages just for the trip!)

You can find lots of ready made "busy book" options out there, but I liked the idea of building it by hand for her.  Yes, it has a homemade quality to it....but it also has a lot of love from Grandma built in and I know she'll learn to appreciate the value in that someday. 

Monday, July 6, 2026

RE-STYLED WEDDING GOWN

 It's been some time since I've been involved in creating a wedding gown.  As I've mentioned before, my favorite project is designing an original.  My second favorite is taking a keepsake gown and re-styling it for a bride.   This project was taking Mom's gown and updating it from it's original 1983 state to a 2026 version.

Whenever I work on a project like this, it really brings out the creative juices (and some sleepless nights) in an attempt to honor the "original" bride, yet also create a revised version of the gown which also honors "today's" bride.  

I too was married in 1983, so I wasn't completely surprised by what we found in the heirloom box.  That timeframe was high necklines, long trains, long sleeves, full skirts which had a full slip with layers of crinoline, or a hoop slip underneath to help with the bell shaped silhouette of the skirt.    

Oh....and let's not forget hats!  (mine was an Australian outback version with one side of the brim up) 

                    

         

How all this gown fit in that heirloom box is pretty amazing.  As you can see the skirt itself is tiers of gathered lace. 

After removing it from the box.....it was time to get the bride into it.  The height of Mom and Daughter was pretty darn close.....and the bodice itself, well, it wasn't too far off either.  Today's bride is a bit smaller, but nothing that couldn't be managed.   The actual step of getting today's bride into their Mom's gown and having her see herself, can be a bit overhelming for some brides.  Bcause the gown is so dated, it can sometimes be hard for them to see the possibilities.   That's where I come in.  

The first thing that became clear was the bodice had potential, but the skirt wasn't something that made sense for 2026.   (I should also mention the Bride/Groom were doing a very western themed event....I'll come back to that)

                                                            


     
    
                                                                                                                                                                  


The Bride was struggling with the lace flounce on the bodice, but I believed it had a western feel, so we removed the sleeves, and it was crazy what a difference that one change made in helping the Bride see the potential.  And it also became clear, it wasn't the flounce that bothered her it was the long sleeves.  I had some satin remants and pinned it over the lace skirt so she could see what a more streamlined skirt would look like.  Our bride was coming to life now that she could imagine where we were headed.  You could see with each change the excitement in her face.     It was settled.....the skirt was going to be satin, and we would use the bodice.  The bodice was in pretty good shape.  There were a few beads/pearls missing that I could easily remedy, and I suggested adding covered buttons to the upper back netting.
While I started dismantling the gown, my bride started playing with AI.   This not only helped her to imagine how the top and bottom were going to blend together, but she also sent me ideas.  She absolutely wanted an "edgy" feel to match her personality.  And....because she likes her legs, she wanted a pretty high slit over one leg.  The assymmetrical ruching was also a must have.
  
The fit was critical since this was a very fitted silhouette.  I promptly went to work on drafting the pattern.  I found a few options for lace for the slit and a gorgeous large applique to use for the top of the slit and embellishing the lace insert itself.    By narrowing the choices, I knew she would be able to make a decision quickly. I emailed pictures over to her and I promptly got them ordered.   Things were moving right along!   In terms of my timeframe......our first fitting was the end of January, and the wedding was May 1st. 
The Bride was on a mission to find a white felt cowboy hat and tall boots to complete the look.  It was the third fitting when she was able to bring them along.  At that same fitting, I also started working on the bustle.  I really like to take my time to work on the look of the bustle....after all, so much of the day the dress is spent bustled, I believe it needs to be special.  When I saw her hat, I knew we could take it up a notch with some custom touches.  So I took the band off and wrapped it in some leftover lace (from the slit) and added a couple pieces of leftover applique to the left side.  She loved it!
And here are some professional photos from the actual wedding.  The Bride and Groom looked amazing!  The Mother of the Bride was floored to see the transformation of her gown (the bride did a "first look" with her Mom).  Between seeing her daughter for the first time on her wedding day and the fact that she was wearing the bodice of her wedding gown.....well, you can only imagine her reaction.  Cue the tissues! 
               






















It was a beautiful day for this very intimate wedding.  All the guests knew of the western theme, so they all came "decked out" in their finest western wear.  

I was honored to be a small part of the day and there's no better feeling than getting big smiles, tears and "bear hugs" from the Bride because she's so pleased with the outcome!

Monday, January 5, 2026

OLIVE OIL CAKE

 If you're looking for a rich and tender cake to top off a meal that's on the light side.  This olive oil cake is the answer.  I had been intrigued for many years when I ran across an olive oil cake recipe while searching for desserts.....but, it just didn't sound right to me.  I finally made it past my fear of the unknown and gave it a try......

I have to tell you....I'm a huge fan!  So yummy, with a crispy sugar top and a super moist interior.  You can't go wrong with this one.  I've made it twice now and I will tell you, I much preferred my 9" springform pan to just a regular cake pan.  Main reason, there's a lot of batter and my springform pan can hold it all (I'll spare you the details of the cake pan that didn't hold it all). 

The other gem about this cake, is how easily it all comes together.  Prep time is all of about 15 minutes. 

INGREDIENTS:

2 cups all purpose flour
1 tsp. salt
1 tsp. baking powder
¼ tsp. baking soda
1 ½ cups plus 2 Tbsp. granulated sugar (divided)
3 large eggs (room temp)
1 cup extra virgin olive oil
1 ¼ cups whole milk
1 Tbsp. fresh lemon zest
2 Tbsp. fresh lemon juice.

DIRECTIONS:

Preheat the oven to 375 degrees.  Lightly oil a 9 inch springform cake pan using olive oil and dust with flour.  Line the bottom with a round parchment.

In a medium bowl, whisk together the flour, salt, baking powder and baking soda.

In a large mixing bowl or the bowl of a stand mixer beat together 1 ½ cups sugar and eggs on high speed using the paddle attachment.  Beat until light and fluffy, about 1 minute.  With the mixer on low, gradually stream in the olive oil.  Beat in the milk, zest, and lemon juice on low until well combined.  With the mixer on low speed gradually add the flour mixture, beating until just combined.  Pour into the prepared pan, and spread the top into an even layer using a small spatula.  Sprinkle with the remaining 2 tsp. of sugar.  

Bake for 40-45 minutes or until a wooden pick inserted in the center comes out clean.  Let the cake cool in the pan on a wire rack for 20 minutes.   Remove the cake from the pan by inverting onto another flat surface.  Remove and discard the parchment and flip again onto your serving platter. 

Enjoy!


Recipe c/o:  www.preppykitchen.com